# Makefile.in generated by automake 1.7.2 from Makefile.am. # docs/Makefile. Generated from Makefile.in by configure. # Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 # Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. # # $Id: Makefile.am,v 1.24 2002/10/14 07:39:50 bagder Exp $ # srcdir = . top_srcdir = .. pkgdatadir = $(datadir)/curl pkglibdir = $(libdir)/curl pkgincludedir = $(includedir)/curl top_builddir = .. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = /usr/bin/install -c -o root -g wheel install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : host_triplet = i386-pc-none ACLOCAL = ${SHELL} /usr/ports/ftp/curl/work/curl-7.10.3/missing --run aclocal-1.7 AMDEP_FALSE = # AMDEP_TRUE = AMTAR = ${SHELL} /usr/ports/ftp/curl/work/curl-7.10.3/missing --run tar AUTOCONF = ${SHELL} /usr/ports/ftp/curl/work/curl-7.10.3/missing --run autoconf AUTOHEADER = ${SHELL} /usr/ports/ftp/curl/work/curl-7.10.3/missing --run autoheader AUTOMAKE = ${SHELL} /usr/ports/ftp/curl/work/curl-7.10.3/missing --run automake-1.7 AWK = gawk CC = cc CCDEPMODE = depmode=gcc3 CFLAGS = -O -pipe CPP = cc -E CPPFLAGS = CURL_CA_BUNDLE = /usr/local/share/curl/curl-ca-bundle.crt CURL_DISABLE_DICT = CURL_DISABLE_FILE = CURL_DISABLE_FTP = CURL_DISABLE_GOPHER = CURL_DISABLE_HTTP = CURL_DISABLE_LDAP = CURL_DISABLE_TELNET = CYGPATH_W = echo DEFS = -DHAVE_CONFIG_H DEPDIR = .deps ECHO = echo ECHO_C = ECHO_N = -n ECHO_T = EGREP = grep -E EXEEXT = HAVE_LIBZ = 1 INSTALL_DATA = install -c -o root -g wheel -m 444 INSTALL_PROGRAM = install -c -s -o root -g wheel -m 555 INSTALL_SCRIPT = install -c -o root -g wheel -m 555 INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s IPV6_ENABLED = 1 KRB4_ENABLED = LDFLAGS = LIBOBJS = LIBS = -lz -lssl -lcrypto -ldl -lz LIBTOOL = $(SHELL) $(top_builddir)/libtool LN_S = ln -s LTLIBOBJS = MAINT = # MAINTAINER_MODE_FALSE = MAINTAINER_MODE_TRUE = # MAKEINFO = ${SHELL} /usr/ports/ftp/curl/work/curl-7.10.3/missing --run makeinfo NO_UNDEFINED_FALSE = NO_UNDEFINED_TRUE = # NROFF = /usr/local/bin/gnroff OBJEXT = o OPENSSL_ENABLED = 1 PACKAGE = curl PACKAGE_BUGREPORT = PACKAGE_NAME = PACKAGE_STRING = PACKAGE_TARNAME = PACKAGE_VERSION = PATH_SEPARATOR = : PERL = /usr/bin/perl PKGADD_NAME = cURL - a client that groks URLs PKGADD_PKG = HAXXcurl PKGADD_VENDOR = curl.haxx.se RANDOM_FILE = /dev/urandom RANLIB = ranlib SET_MAKE = SHELL = /bin/sh STRIP = strip VERSION = 7.10.3 VERSIONNUM = 070a03 YACC = bison -y ac_ct_CC = ac_ct_RANLIB = ranlib ac_ct_STRIP = strip am__fastdepCC_FALSE = # am__fastdepCC_TRUE = am__include = include am__quote = bindir = ${exec_prefix}/bin build = i386-pc-none build_alias = i386 build_cpu = i386 build_os = none build_vendor = pc datadir = ${prefix}/share exec_prefix = ${prefix} host = i386-pc-none host_alias = i386 host_cpu = i386 host_os = none host_vendor = pc includedir = ${prefix}/include infodir = ${prefix}/info install_sh = /usr/ports/ftp/curl/work/curl-7.10.3/install-sh libdir = ${exec_prefix}/lib libexecdir = ${exec_prefix}/libexec localstatedir = ${prefix}/var mandir = ${prefix}/man oldincludedir = /usr/include prefix = /usr/local program_transform_name = s,x,x, sbindir = ${exec_prefix}/sbin sharedstatedir = ${prefix}/com sysconfdir = ${prefix}/etc target_alias = i386 AUTOMAKE_OPTIONS = foreign no-dependencies man_MANS = \ curl.1 \ curl-config.1 HTMLPAGES = \ curl.html \ curl-config.html PDFPAGES = \ curl.pdf \ curl-config.pdf SUBDIRS = examples libcurl EXTRA_DIST = MANUAL BUGS CONTRIBUTE FAQ FEATURES INTERNALS \ README.win32 RESOURCES TODO TheArtOfHttpScripting THANKS \ VERSIONS KNOWN_BUGS BINDINGS $(man_MANS) $(HTMLPAGES) \ HISTORY INSTALL libcurl-the-guide $(PDFPAGES) MAN2HTML = gnroff -man $< | man2html >$@ SUFFIXES = .1 .3 .html .pdf MAN2PDF = groff -Tps -man curl.1 $< >$@ subdir = docs mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/lib/config.h \ $(top_builddir)/src/config.h \ $(top_builddir)/tests/server/config.h \ $(top_builddir)/lib/ca-bundle.h CONFIG_CLEAN_FILES = depcomp = am__depfiles_maybe = DIST_SOURCES = MANS = $(man_MANS) RECURSIVE_TARGETS = info-recursive dvi-recursive pdf-recursive \ ps-recursive install-info-recursive uninstall-info-recursive \ all-recursive install-data-recursive install-exec-recursive \ installdirs-recursive install-recursive uninstall-recursive \ check-recursive installcheck-recursive DIST_COMMON = INSTALL Makefile.am Makefile.in THANKS TODO DIST_SUBDIRS = $(SUBDIRS) all: all-recursive .SUFFIXES: .SUFFIXES: .1 .3 .html .pdf $(srcdir)/Makefile.in: # Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) cd $(top_srcdir) && \ $(AUTOMAKE) --foreign docs/Makefile Makefile: # $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: man1dir = $(mandir)/man1 install-man1: $(man1_MANS) $(man_MANS) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(man1dir) @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ for i in $$l2; do \ case "$$i" in \ *.1*) list="$$list $$i" ;; \ esac; \ done; \ for i in $$list; do \ if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ else file=$$i; fi; \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ case "$$ext" in \ 1*) ;; \ *) ext='1' ;; \ esac; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \ $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \ done uninstall-man1: @$(NORMAL_UNINSTALL) @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ for i in $$l2; do \ case "$$i" in \ *.1*) list="$$list $$i" ;; \ esac; \ done; \ for i in $$list; do \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ case "$$ext" in \ 1*) ;; \ *) ext='1' ;; \ esac; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \ rm -f $(DESTDIR)$(man1dir)/$$inst; \ done # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @set fnord $$MAKEFLAGS; amf=$$2; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @set fnord $$MAKEFLAGS; amf=$$2; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ETAGS = etags ETAGSFLAGS = CTAGS = ctags CTAGSFLAGS = tags: TAGS ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(ETAGS_ARGS)$$tags$$unique" \ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) top_distdir = .. distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkinstalldirs) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d $(distdir)/$$subdir \ || mkdir $(distdir)/$$subdir \ || exit 1; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" \ distdir=../$(distdir)/$$subdir \ distdir) \ || exit 1; \ fi; \ done check-am: all-am check: check-recursive all-am: Makefile $(MANS) installdirs: installdirs-recursive installdirs-am: $(mkinstalldirs) $(DESTDIR)$(man1dir) install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive distclean-am: clean-am distclean-generic distclean-libtool \ distclean-tags dvi: dvi-recursive dvi-am: info: info-recursive info-am: install-data-am: install-man install-exec-am: install-info: install-info-recursive install-man: install-man1 installcheck-am: maintainer-clean: maintainer-clean-recursive maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-info-am uninstall-man uninstall-info: uninstall-info-recursive uninstall-man: uninstall-man1 .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am clean \ clean-generic clean-libtool clean-recursive ctags \ ctags-recursive distclean distclean-generic distclean-libtool \ distclean-recursive distclean-tags distdir dvi dvi-am \ dvi-recursive info info-am info-recursive install install-am \ install-data install-data-am install-data-recursive \ install-exec install-exec-am install-exec-recursive \ install-info install-info-am install-info-recursive install-man \ install-man1 install-recursive install-strip installcheck \ installcheck-am installdirs installdirs-am \ installdirs-recursive maintainer-clean maintainer-clean-generic \ maintainer-clean-recursive mostlyclean mostlyclean-generic \ mostlyclean-libtool mostlyclean-recursive pdf pdf-am \ pdf-recursive ps ps-am ps-recursive tags tags-recursive \ uninstall uninstall-am uninstall-info-am \ uninstall-info-recursive uninstall-man uninstall-man1 \ uninstall-recursive html: $(HTMLPAGES) cd libcurl; make html .3.html: $(MAN2HTML) .1.html: $(MAN2HTML) pdf: for file in $(man_MANS); do \ foo=`echo $$file | sed -e 's/\.[0-9]$$//g'`; \ groff -Tps -man $$file >$$foo.ps; \ ps2pdf $$foo.ps $$foo.pdf; \ done cd libcurl; make pdf # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: